Winch drum centred avoids the interference of rope and provides streamlined appearance
Mechanical load holding and dynamic brake for 100% braking
High efficiency, low amp draw and sealed permanent magnet motor
Full metal 3 stage planetary gear train for greater pulling force
Sliding pin and ring gear clutch for rapid wire rope payout
Weather sealed contactor gives better water proof and lower amp. draw
E/e marked as of EU Directive 97/24/EC. EEC Type - Approval Number: e4*97/24*97/24/8/IX*0036*01
Specifications / part numbers:
Winch Part Number: PN 123561
Maximum line pull: 3,000 lb (1,361 kg)
Motor: Permanent magnet 800w/1.0hp 12V DC motor
Gear train: 3-stage planetary gears
Gear ratio: 138.5:1
Brake: Mechanical & dynamic
Clutch: Sliding pin and ring gear
Control: Handlebar rocker switch
Wire rope: 4.8 mm x 15.2 m (3/16" x 50'), galvanized aircraft A7 x 19
Winch construction: Aluminum die cast housings and drum
Rotation of winch: Wire rope shall be under-wound orientation only
Drum size: 55 x 75 mm (2.2" x 3")
Mounting bolts pattern: 76 x 124 mm (3"x 4.9")
Line pull and rope capacity:
Layer of Wire Rope
Pull by layer kg / lbs
Total rope m / ft
1st layer
1,361 / 3,000
2.8 / 9.3
2nd layer
1,173 / 2,585
6.1 / 20.1
3rd layer
1,030 / 2,271
9.9 / 32.5
4th layer
918 / 2,025
14.1 / 46.3
5th layer
829 / 1,827
15.2 / 50
Line speed and amp. draw (1st layer of rope on the drum):
Line pull, kg / lbs
Line speed, mpm / fpm
Amp. draw, A
No Load
6.8 / 22.2
20
227 / 500
5.7 / 18.7
45
454 / 1,000
4.8 / 15.6
75
680 / 1,500
3.8 / 12.5
105
907 / 2,000
3.0 / 9.8
140
1,134 / 2,500
2.5 / 8.0
180
1,361 / 3,000
2.0 / 6.7
230
Warning:
* The winch is not intended to be used in any manner for the movement or lifting of persons.
* The rated line pull shown is based on the first layer of rope on the drum.
The rope winding on the drum shall remain 5 wraps from the drum.